current location:Home > cleaning > Can the gas stove still be used if it is flooded with water? What is the reason for the gas stove not igniting?

Can the gas stove still be used if it is flooded with water? What is the reason for the gas stove not igniting?

2022-10-07 07:52:34 [Materials ] source:iohomedecor.com
Can the gas stove still be used if it is flooded with water? What is the reason for the gas stove not igniting?

Gas stoves are commonly used appliances in the kitchen at home. They mainly burn natural gas, gas, etc., and are used for boiling water and cooking. It is inevitable that there will be water in the kitchen, so if the gas stove is accidentally flooded with water, can it still be used? Is it dangerous? What should I do if it doesn't burn?

Can the gas stove still be used with water?

The gas stove can still be used with water, if it is a small amount of water, then It will be evaporated or naturally air-dried during the heating process, but it is easy to rust over time. However, if the water intake is relatively large, you should pay attention. If the gas stove is turned on, it will easily damage the coal gallbladder and cause a fire. It is recommended to turn it off; if the gas stove is not turned on, do not turn it on. It is best to use it after drying, such as drying with a rag or blowing it with a hair dryer.

What should I do if the gas stove is flooded and can't burn?

After the gas stove enters the water, firstly wipe the gas stove and all parts of the gas switch, stove eye, battery, etc. clean and free of water. Then try to light it again or ignite it with a lighter. If you can hear a slight popping sound when you turn on the gas stove, this is the sound of gas, indicating that there is gas flowing out. If there is no fire, try using a lighter. Remember to turn off the gas to prevent accidents. Also check the battery, replace the battery first and adjust the damper. Usually, the middle position feels good. Then poke the hole with wire to see if it is blocked. If there is alcohol at home, you can also light the chopsticks with a small amount of alcohol, then turn on the gas stove and put the flame into the small mouth of the electric pole. If the gas stove catches fire, let it burn for a while, then close the valve. Repeat several times.

What is the reason why the gas stove fails to catch fire

1. The gas in the gas is insufficient and cannot be turned on, so it may not be possible to turn on the gas kitchen. 2. It may be because the battery of the gas stove is dead and the gas cannot be turned on. It may be that the gas cannot be opened and the gas cannot be opened; 3. It may be that the discharge needle is faulty and the gas cannot be greatly dyed. It could also be because the gas stove pipe is clogged.

(Responsible editor:workmanship)

Recommended articles