How do three-color lights become one color? How to change the three gears of the living room lights to the first gear full brightness?

When decorating, many people don't know what kind of lamp to buy. Many people choose three-color lamps, so that there is warm light and white light, which is very beneficial to everyone's needs. So, how do three-color lights become one color? Does the color change sometimes? Let's take a look at the introduction!

How one or three-color lights become one color

Just change the bulbs to the same hue. The principle of the tri-color lamp is that the lamp tube has three different shades and has multiple control switches, and each time the switch is turned on, a different color of light will appear. When you want to adjust three shades to one color, you can change the three different shades of the bulb to one. For example, the three shades are: warm, cool, and normal, and changing the color of warm and cool lights. When replacing the lamp with a common color lamp, only the ordinary color lamp remains, and when the switch is turned on again, only the light of that color is left.

Second, how to change the third gear of the living room lamp to the first gear full brightness

You can purchase a constant current power supply in advance, and then cut off the original lamp Then connect the wires to the positive and negative terminals of the constant current power supply, usually, the black wire is connected to the positive terminal of the constant current power supply, while the yellow and white wires are connected to the negative terminal of the constant current power supply. The wire needs to be connected to the negative side of the cross current and constant current, but it is still necessary to check that the light works properly before wiring, and the power must be cut off. In fact, it's best to consult a professional before making changes, you must understand how it works, be safe, and prepare professional tools.

Third, how to adjust the order of the three gears of the living room lights

1. First, please cut off the main switch of the power supply before wiring to ensure that The safety of our subsequent operations. 2. The white, yellow, and blue wires of the segment switch are all connected to the L terminals of the three lamps, and then from the n terminals of the three lamps to the black wire below the segment switch. 3. Finally, connect the red and nearby black wires of the segment switch to the neutral and live wires.

(Responsible editor：Wall decoration)