current location:Home > cleaning > Suggest everyone: When buying a socket, you must insist on "6 no choices"! It's not bluffing, it's real experience

Suggest everyone: When buying a socket, you must insist on "6 no choices"! It's not bluffing, it's real experience

2022-12-05 02:09:11 [floor ] source:iohomedecor.com
Suggest everyone: When buying a socket, you must insist on "6 no choices"! It's not bluffing, it's real experience

There are still many people who think that "the socket can be used, there is no difference between good and bad". In fact, the wrong socket selection will affect the user experience after moving in, and it will be troublesome to replace it later. As a past person, it is recommended that you stick to "6 no choices" when buying sockets! It's not nonsense, it's real experience. It is recommended that novices read more to avoid stepping on pits.

Do not choose a framed socket

The framed socket is relatively heavy and does not fit on the wall. It is not as good as a borderless socket, which is visually light and thin, and it is high-end on the wall, and the panel surface is smooth, which is easy to be hygienic.

Do not choose a socket without a safety door

The socket without a safety door has a simple internal structure and lacks protection measures. It is very difficult for foreign objects to be inserted into the socket. It is easy to conduct electricity, and there is a safety hazard. Although this kind of socket has been eliminated on the market, some inferior sockets still enter the market. It is best to pay attention to the internal situation of the socket hole when purchasing. If you can directly see the shrapnel, it means that this kind of socket lacks safety door protection.

Do not choose the socket on the back panel of the steel frame

The steel frame back panel will have the risk of leakage and rust if it is used for a long time. Avoid as much as possible when buying. It is recommended to choose PC rib backplane socket, which has strong compression and corrosion resistance and high safety.

Do not choose a small-pitch five-hole socket

The socket spacing is too small, and the socket will fight or even become unusable. It is recommended to choose a socket with a hole spacing of ≥15mm for an oblique five-hole socket, so that it will not affect the use, or directly buy an oblique five-hole socket.

Do not choose kitchen and bathroom sockets without a splash box

The bathroom is damp, dark, and uses a lot of water. For safety, it is best to choose a The socket of the splash-proof box; there is a lot of oil smoke in the kitchen, so it is best to bring a splash-proof box to the socket, which is convenient for later cleaning.

Do not choose 10A high-power electrical sockets

Air conditioners, refrigerators, integrated stoves, water heaters and other electrical appliances have higher power, and ordinary 10A The socket cannot meet the high load demand, so the socket corresponding to this type of electrical appliance should be selected at 16A to avoid safety hazards caused by overloading. (The picture comes from the Internet, and the infringement contact is deleted)

(Responsible editor:Ceiling decoration)

Related content
Recommended articles