current location:Home > floor > Why can't the drum washing machine spin dry? What should I do if the washing machine does not spin dry?

Why can't the drum washing machine spin dry? What should I do if the washing machine does not spin dry?

2022-12-05 02:34:40 [Materials ] source:iohomedecor.com
Why can't the drum washing machine spin dry? What should I do if the washing machine does not spin dry?

A washing machine is a household appliance that is often used for washing clothes at home. It can be washed, rinsed, dried, and some can be dried. The spin-dry function of the washing machine can get rid of most of the water. Although the clothes that are taken out are not completely dry, the water cannot be squeezed out. If the water comes out of the screw, then there may be a problem with the washing machine.

1. Why does the drum washing machine not spin dry

1. The clothes are placed unbalanced in the drum washing machine. When the laundry cannot be adjusted, the washing machine will automatically set a low speed, and the dehydration effect of this speed will be slightly worse. It is recommended to arrange the clothes in the bucket flat. 2. The top cover switch of the drum washing machine is damaged. Since the washing machine moves at high speed during dehydration, the top cover is not allowed to be opened, so there is a linkage switch on the top cover, which automatically disconnects the circuit as soon as the cover is opened. If it's damaged and dehydrated, it won't move. Replacing the switch is recommended. 3. The drainage system of the drum washing machine is blocked. The laundry liquid in the water tank cannot be drained out, or there is too much foam in the water tank, it is difficult to drain the laundry liquid in the water tank for a while, the water level switch cannot be reset, and the washing machine cannot enter the dehydration process. It is recommended to clean the drain valve. 4. The water level switch of the drum washing machine cannot be reset. The dehydration process of the washing machine starts when the water level switch is reset after the washing liquid is discharged. Dehydration is a process that needs to be done after draining the water. If the drain level switch is damaged, the spin process will not be accessible. It is recommended to replace the drain level switch. 5. The computer control panel of the drum washing machine is faulty. It can only be replaced, because the control panel is coated with waterproof glue, and the maintenance is quite inconvenient. 6. Check whether the rotation of the drum of the drum washing machine is blocked. If there is a blockage, check the drum shaft and motor shaft for damage and lack of oil. 7. The drum washing machine spin dryer does not turn or cannot turn. Check that the brake on the spinner motor is not released. Open the back cover and check if the brakes move. If OK, check for broken or loose drawstrings. , to adjust or connect the cable. 8. The wear diameter of the square wire torsion spring of the clutch becomes larger, and the rust makes the square wire torsion spring unable to clamp the dehydration shaft to drive the dehydration barrel to operate normally, resulting in dehydration weakness.

Second, what should I do if the washing machine does not spin very dry

If the clothes cannot be dried, first check whether the clothes are knotted. If the clothes are tangled, the washing machine cannot run at high speed in order to avoid the washer vibrating violently. You rearrange and select the spin program. This feature is called Smart Eccentric Protection, and it is explained in detail in the user manual. If it still won't dry, take the clothes out and let the washing machine empty. If it can dry, then the washing machine is fine. If it doesn't dry, the washing machine may need aftermarket service. If it is a drum machine, please confirm the rotation speed of the washing machine you purchased. The speed of ordinary drum machines is 500 rpm and 800 rpm. No dehydration if you buy the 500 rpm model. Only those above 800 rpm can be dehydrated. If the pulsator washing machine does not dry automatically, first, the belt is too loose. Open the back cover and adjust the motor belt. The other is that the motor is burned out, the winding on one side is weak, and the motor needs to be replaced or repaired. Generally speaking, the main reason is that the belt is too loose.

3. How much does it cost to replace the spin-drying motor of the washing machine

The price of the spin-drying (drying) motor of the washing machine is generally less than 100 yuan. Because the washing machine has no unified design, the parts of the washing machine produced by each manufacturer are different, so it is not universal. If you need to repair or buy a replacement washing machine dehydration (drying) motor, it is recommended to buy it according to the model of the washing machine, or contact the brand and ask the washing machine after-sales service department for repair or purchase.

(Responsible editor:workmanship)

Recommended articles